Wiring and hitches are sold separately because not everyone uses a hitch for towing. Trailer hitches for the 2011 Hyundai Veracruz such as # 75532 include the hitch and the hardware to install it.
For the trailer wiring you can use harness # C56332 to add a 4-Way flat connector to the rear of the vehicle.
I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes... view full answer...
There is 4-pin wiring available for your 2017 GMC Acadia Limited, but Curt hitch # 13424 does not include the wiring.
Instead, you need the T-One Wiring Harness # 118270 which gives you a 4-flat connector allowing you to power your trailer's lights. If you are going to be towing, I recommend checking out Ball Mount Kit # 989900, which is for 2” hitches and may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4” rise or 2” drop and the other with a 2-3/4” rise... view full answer...
Curt Trailer Hitch Receiver # 13354 does not come with a wiring harness; reason being that not everyone is using the hitch for towing so we make each component available separately. To add a 4-Way flat connector to your 2009 Acura MDX you can use # 118424. I have linked videos showing example installations of both the hitch and the wiring for you.
I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4... view full answer...
Draw-Tite trailer hitch # 75528 includes all of the required mounting hardware already. I have included a picture of the hardware that comes with the hitch.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise... view full answer...
I checked with Curt and the 1/2" fishwire used to install trailer hitch # C13550 does come with the hitch. I have linked the video you mentioned showing an example installation of the hitch which will be nearly identical on your 2004 Ford Explorer.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball,... view full answer...
For Class III trailer hitches like the Draw-Tite, # 75338, the ball mount, pin and clips is not included because a Class III hitch does not require a specific ball mount. Lower Class hitches do require a specific ball mount so for many of them we will include it.
There is always a recommended ball mount for a Class III hitch but in order to determine the right one for your needs you will want to measure for the rise or drop required to tow the trailer level. What you will do is measure... view full answer...
Yes. Custom fit trailer hitch # e98865 includes all of the necessary hardware for installation on your 2014 Chevy Equinox. I have included links to the instructions and a video showing an example installation for you.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage... view full answer...
Yes, the Curt trailer hitch # 13229 does come with the necessary hardware for installation on your 2005 Dodge Dakota. I have included a link to a video showing an example installation for you.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball... view full answer...
While we do not have a custom fit trailer hitch receiver for your 1989 Grumman Olson, we do still have another alternative.
Instead, you'll need to use either the:
-7" Weld-On Bracket Kit for Draw-Tite Class V Ultra Frame Service Body Trailer Hitch # 4907, which has a 7" drop.
Or
-The 16" Weld-On Bracket Kit for Draw-Tite Class V Ultra Frame Service Body Trailer Hitch # 4916, which has a 16" drop.
From here you can use the Draw-Tite Ultra Frame Service Body Trailer Hitch # 41990-16.
This... view full answer...
Each of the bolts for the Draw-Tite Trailer Hitch # 36408 that fits your 2007 Chevy Equinox are M12 hex bolts.
I strongly recommend using the Replacement Hardware Kit for Trailer Hitches # RHK to get the correct hardware for this hitch.
All you need to do is go to this product page, enter the model number of your hitch in the box that says "Hitch Item Number" and then select the correct manufacturer from the drop-down box. So you'll simply enter "36408" in the "Hitch Item Number" box... view full answer...
Trailer hitches like the Curt # C11391 come with the mounting hardware needed to install the hitch on your 2016 Acura ILX, so yes, as long as you've got the tools you'll get everything you need to get the hitch on the vehicle.
A wiring harness is not included with the hitch, so I recommend using the Tekonsha # 118627 because of the reliability of the Tekonsha harnesses. This is a plug and play harness, so the installation is very easy and because it utilizes a powered converter box your... view full answer...
The Draw-Tite Hitch # 75528, which is a confirmed fit for your 2015 Buick Enclave, does come with the hardware needed for installation; it is a complete bolt-on installation that does come with bolts. I have added a link to a video of this hitch being installed on a '15 Enclave for you to take a look at.
As for wiring, "regular" wiring would not work; for an aftermarket harness to work on this particular vehicle you would need to have the factory tow package to use T-One Vehicle Wiring... view full answer...
I was able to go out to the warehouse and check the # EQ37101ET weight distributions for you and I found that they all have the new snap pin like the image of the # EQ95-01-9430 you referenced.
The shank that offers a larger drop for the Equal-i-zer system that is compatible with a 2 inch trailer hitch is the # EQ90-02-4400. I have linked it to this page for you to check out. It has a gross trailer weight of 14,000lbs, a tongue weight of 600lbs to 1,400lbs, and an overall length of 12... view full answer...
The trailer wiring harness is not included with the Draw-Tite Max-Frame Trailer Hitch Receiver, part # 75782. This is because the hitch can be used on 2013 to 2016 Ford Escapes and the vehicles may have different requirements for wiring harnesses.
The trailer wiring harness I recommend for your 2016 Escape is part # 118566. Because your Escape has separate wiring (brake and turn signals are sent along separate wires. A powered converter module is required to safeguard the vehicle's wiring... view full answer...
Yes, the Draw-Tite Trailer Hitch # 76128 that fits your 2018 Honda CR-V does include the fish wire (pull wire) that you asked about. If you take a look at the cut out of the linked installation instructions you can see the fish wire is included, as well as the other hardware that comes with the hitch.
This hitch is a great choice for your '18 CR-V because it is strong, with a 4,500 lb towing capacity and whopping 675 lb tongue weight capacity, as well as highly durable, which is evidenced... view full answer...
Absolutely! Curt trailer hitch # C13068 for the 2005 Honda Odyssey includes the necessary hardware for installation. I have included a picture of it for you. I have also included a link to a video showing an example installation for you.
If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right... view full answer...
The Curt Trailer Hitch Receiver # C11356 does come with the fish wire so that you can properly install the included hardware.
Please note that per Curt, the Curt Trailer Hitch Support Strap # 18050 must be used for all non-trailer loads, such as bike racks, cargo carriers and such. Otherwise the warranty for the Curt Trailer Hitch Receiver # C11356 will be void.
If you will be using the hitch for towing, then I recommend using the Curt Class II Drawbar # C45016 along with either the... view full answer...
The Curt Trailer Hitch Receiver # 13266 that fits your 2018 Volvo V60 has a 34 lb shipping weight. This is a Class III, 2 inch hitch with a 3,500 lb towing capacity and 350 lb tongue weight capacity. It has a black powder coat for rust resistance, is made in the USA and comes with a lifetime warranty.
To add wiring which will give you a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # C56287. It is also recommended you use Dielectric Grease for Electrical... view full answer...
You are correct. The only thing that comes with the Draw-Tite Max-Frame Trailer Hitch Receiver # 75556 is the trailer hitch itself and the hardware needed for installation on your 2015 Chevrolet Captiva Sport.
For a trailer wiring kit I recommend the Curt T-Connector # C56257. This plugs into the wiring behind your tail lights and just needs the wire run to the battery to power the trailer lights. This gives you a 4-Way flat connector for basic trailer lighting functions.
To complete... view full answer...
Go To Results